Fraps help

[MrSlippyfist]

Alright... I wanna make a video using fraps trial version
can someone kindly explain to me how to use it and while youre at it post your hotkeys settings.
Thanks in advance

[artyped]

its pretty much self explanatory - set a hotkey for video recording, and press it in game once to start recording, once to stop. i use f12 btw.

[PonZiRuLeS]

I use F9 :)

[SoDangCute]

Unless you need f12 for aimbot...it's a pointless key...so I agree with artyped...you should use f12 :thumbsup:

[xevanxsinx]

i was printscreen :P and yeah f9??? thats gonna make you team talk. ohh yes btw with fraps switch the pic. botton to sumthing else or urll get alot of pix of gb w.e u hit f10 .. the buddy list .. itll get anoyying

[Tourniqu3t]

Alright... I wanna make a video using fraps trial version
can someone kindly explain to me how to use it and while youre at it post your hotkeys settings.
Thanks in advance

Fraps is very easy to use. I put settings for hotkey. So you can use a button for recording.

If you open Fraps, You need to do like this

1. General tab = check mark on Start Fraps Minimized

You have to ignore "Fraps window always on top" and "Run Fraps when Windows starts"
2. Fps tab = don't touch anything expect "benchmarking hotkey"

You should put F6 for benchmarking hotkey

3. Movies tab =

Folder to save movies in:

C:\Program Files\Fraps

When you see "Disable" in that one, don't touch it....

Check mark on "Record Sound"

Choose "Detect best sound input"

Choose "Full-Size" <- This one is recommended because Administrators in ijji can see videos very clearly.

choose "blank numbers but you have to put 20" instead of choosing 25 fps, 30 fps, 50 fps, and 60 fps"

20 fps is really good for GunBound. So your record won't be shaking or skipping that much...

Sound Device:

Realtek AC97 Audio <- use this if you run default sound card

Sound Input:

Stereo Mix

You need to ignore "No Cursor and No Sync"

Video Capture Hotkey:

F2 <- this one is recommended. Because F10 is for opening chat buddy. It will be conflict if you choose F10 for video capture....

4. Screenshots

Folder to save screenshots in:

C:\Program Files\Fraps

Screen Capture Hotkey:

F3

You have to ignore "Include frame rate overlay on screenshots" and "Repeat Screen capture every 10 seconds until hotkey pressed again"

You can see 4 extensions for pictures. I will recommend you to use jpg if you wish to use pictures instead.

BMP = it makes a lot of mb
JPG = It makes small mb

Choose JPG

You won't waste your hard drive's memory.

That's all you need to do. But you have to minimize Fraps. And then you can play GunBound. If you don't see yellow numbers as fps, press F6. When you see yellow numbers, you can press F2 to record games. When you want to stop recording, click on F2 again. Red numbers means recording. Yellow means do nothing or stop recording (after you press F2 again)

Don't leave recording forever. It wastes a lot of mb. You could make part 1, part 2, and etc.

If you think it's impossible to send to administrators in ijji with your link, I would recommend you to use Sony Vegas 6 version or latest versions after you use Fraps.

When you open Sony Vegas, you have to find a video that you recorded and just drag that video to video length from Explorer (in Sony Vegas but not from Internet Explorer).

After that, go to File -> Render As. When you are in Render As, don't touch anything at first moment but you need to go in Custom. Don't touch anything in Project after you got in Custom. But you need to click on Video tab.

Don't touch anything in Video tab expect "Video Format"

You have to choose "Xvid MPEG-4 Codec" for Video Format.

Don't worry about Project and Audio tabs.

Then click on OK. You need to put a video name.

Example:

Filename: reported
Save As Type: Video for Windows (*.AVI)

Ignore everything at the bottom.

Click on SAVE.

Let Xvid codec and Sony Vegas work on that video itself until it says 100%.

You will be able to upload that video with Xvid codec to your file manager.

Send your link to Administrators in ijji over email.

Their email address is gunbound_hacker@ijji.com

If you don't have Xvid codec, I am going to put in here.

http://www.koepi.org/XviD-1.0.3-20122004.exe

File Size: 600 kb

You can ask me any questions. I will be happy to help you with that...

P.S: Administrators in ijji should make a pin on this thread.

Thank you for learning how to use Fraps and Sony Vegas.

[MuTTanZ]

You need a powerful Pc to use fraps man?

[Tourniqu3t]

You need a powerful Pc to use fraps man?

He should have a good video card since fraps is using frame per second from the video card while he uses fraps. And also his hard drive should be over 100 gb. That's why I explained about Sony Vegas. It's useful for him to reduce like from 200 mb to 18mb. That depends on how many mb will his video be. If he reduce that, he would be able to show that to administrators in ijji.

[Tah_Gamer]

like how do you use it for more seconds because i can only do it for 30 seconds

[Tourniqu3t]

like how do you use it for more seconds because i can only do it for 30 seconds


It's because your fps is not registered. If you purchase one, you will be able to record without any limition like 30 seconds.

[Tah_Gamer]

It's because your fps is not registered. If you purchase one, you will be able to record without any limition like 30 seconds.


i aint buying it tho so forget that

[kubi07]

hey uh where do you get fraps?

[Annihilation]

Use f12 as a hotkey.

[artyped]

fraps.com.......

[Annihilation]

Fraps is very easy to use. I put settings for hotkey. So you can use a button for recording.

If you open Fraps, You need to do like this

1. General tab = check mark on Start Fraps Minimized

You have to ignore "Fraps window always on top" and "Run Fraps when Windows starts"
2. Fps tab = don't touch anything expect "benchmarking hotkey"

You should put F6 for benchmarking hotkey

3. Movies tab =

Folder to save movies in:

C:\Program Files\Fraps

When you see "Disable" in that one, don't touch it....

Check mark on "Record Sound"

Choose "Detect best sound input"

Choose "Full-Size" <- This one is recommended because Administrators in ijji can see videos very clearly.

choose "blank numbers but you have to put 20" instead of choosing 25 fps, 30 fps, 50 fps, and 60 fps"

20 fps is really good for GunBound. So your record won't be shaking or skipping that much...

Sound Device:

Realtek AC97 Audio <- use this if you run default sound card

Sound Input:

Stereo Mix

You need to ignore "No Cursor and No Sync"

Video Capture Hotkey:

F2 <- this one is recommended. Because F10 is for opening chat buddy. It will be conflict if you choose F10 for video capture....

4. Screenshots

Folder to save screenshots in:

C:\Program Files\Fraps

Screen Capture Hotkey:

F3

You have to ignore "Include frame rate overlay on screenshots" and "Repeat Screen capture every 10 seconds until hotkey pressed again"

You can see 4 extensions for pictures. I will recommend you to use jpg if you wish to use pictures instead.

BMP = it makes a lot of mb
JPG = It makes small mb

Choose JPG

You won't waste your hard drive's memory.

That's all you need to do. But you have to minimize Fraps. And then you can play GunBound. If you don't see yellow numbers as fps, press F6. When you see yellow numbers, you can press F2 to record games. When you want to stop recording, click on F2 again. Red numbers means recording. Yellow means do nothing or stop recording (after you press F2 again)

Don't leave recording forever. It wastes a lot of mb. You could make part 1, part 2, and etc.

If you think it's impossible to send to administrators in ijji with your link, I would recommend you to use Sony Vegas 6 version or latest versions after you use Fraps.

When you open Sony Vegas, you have to find a video that you recorded and just drag that video to video length from Explorer (in Sony Vegas but not from Internet Explorer).

After that, go to File -> Render As. When you are in Render As, don't touch anything at first moment but you need to go in Custom. Don't touch anything in Project after you got in Custom. But you need to click on Video tab.

Don't touch anything in Video tab expect "Video Format"

You have to choose "Xvid MPEG-4 Codec" for Video Format.

Don't worry about Project and Audio tabs.

Then click on OK. You need to put a video name.

Example:

Filename: reported
Save As Type: Video for Windows (*.AVI)

Ignore everything at the bottom.

Click on SAVE.

Let Xvid codec and Sony Vegas work on that video itself until it says 100%.

You will be able to upload that video with Xvid codec to your file manager.

Send your link to Administrators in ijji over email.

Their email address is gunbound_hacker@ijji.com

If you don't have Xvid codec, I am going to put in here.

http://www.koepi.org/XviD-1.0.3-20122004.exe

File Size: 600 kb

You can ask me any questions. I will be happy to help you with that...

P.S: Administrators in ijji should make a pin on this thread.

Thank you for learning how to use Fraps and Sony Vegas.

Woah Tourniqu3t! Long quote xD but nice!!

[Wizardplum]

i use printscreen lol

[Annihilation]

Printscreen suks, try F12.

[foyage]

But who wants to record for more then 30 seconds
I think that is plenty enough
And if you want to make a movie
use windows movie maker
Just search for it you have it
Then use that
I use it
I made this video
Link:http://video.tinypic.com/player.swf?file=5zgg0hw (http://video.tinypic.com/player.swf?file=5zgg0hw)

[foyage]

toriq: there is a few things That i wouldnt use
If you would want to make movie then dont do sound
My first clips for my movie where in sound
Then it just sounded horrible and i couldnt take off sound

[Tourniqu3t]

Woah Tourniqu3t! Long quote xD but nice!!

Thank you :)