NAT error, FIX (Portforwarding)

[Mauser]

Simple guide to portforwarding.

When you got a router (http://en.wikipedia.org/wiki/Router) in your network you need to config your router to prevent NAT errors.
Your router blocks certain ports that gunz need to connect to other players. To open these ports and stop NAT errors follow this guide. Nat error is also known as Agent Error.

1. Find your router device, and write down the brand and type(number).

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

3. Go to portforward.com (http://www.portforward.com) and search at PortFoward your router. Here you can find a guide on how to forward your router.

4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

5. Now your done, test it on gunz :)

Extra/important:
Firewall software block ports also. Open your firewall software and search options to open ports. Or turn off the firewalls while playing gunz. This includes Windows Firewall.

People with Netgear and linksys should upgrade their firmware in order to get portforwarding to work. If it still doesnt work .. then I dont know! (Thank _Aes_Sedai_ for the firmware tip) Firmware is found on official websites of your router brand. This solution might also apply for other routers.

For questions you can post in this thread, Tho im not always arround, if you dont get help try send a pm to me.

[StarSkyll]

Nice guide, I never had a problem like this. gg

[Xellros]

Sure, here's a question. Why doesn't IJJI just create a VPN for all it's members so all the short-distance-lag will go away, which would tunnel through all the NAT firewalls on our routers aswell?

[Mauser]

Im not that technically xD but VPN hmm so its like everything serverside? All movements/actions that players do go through the server then back to other members? :S

Sounds good, then you only have the lag from your house to the server, sux if the server is far away then get same ping to everyone?

It will still tunnel through a lot with VPN...

[Mo Hawk]

Mauser i am linking your guide to my "cant see server solution list" is that ok?

[Mauser]

@MoHawk sure but I think that problem accurs cause of Firewall?

[GM_Vanquish]

Remember to open TCP/UDP ports 7700-7800. On your PC, go to Start>Control Panel>User Accounts to verify your account has Administrator privileges. Also be aware that GunZ can only be launched through Internet Explorer.

[Mo Hawk]

@MoHawk sure but I think that problem accurs cause of Firewall?
yeah but other thing can cause this to. port antivirus Ect ect... i've been helping people get into gunz for omost a yr now.

[HyphyJuice]

Great, thanks man!:clap: :thumbsup:
:gj: :gj:

I have a shtty router that doesnt even include manuals how to do portforwarding with it, but thnks to portforward.com i found a way to do it.
Now I should be able to play at the same time while my brother is playing without the redicolous pings.
weeeeee

[-»ƒa]

Vpn ftw, & they just need to make the server run the maps (statics) so people can't edit their map in the folder & run around through walls (no clip), (easly done), I just think ijji are the worst developers in history, same with Maiet.

I could out do their dev skills anyday.

[HyphyJuice]

I could out do their dev skills anyday.

ooo Big words. Well I'll be waiting for your version of Gunz2

[boyrune]

WAT DOES NAT SUPPISE TO MEAN? I HAVE AGENT ERROR PROBLEMS:confused:

[Cherry]

Yeah I get an agent error problem... for the past oh, 4 weeks I have been doing just fine playing in whatever server I wanted but every time I did clan war it would give me agent error to everyone. Now today all of a sudden I can't get play on any server except clan war without getting an agent error on everybody. I know portforwarding won't work because I have done that already and It didn't do anything. My firewall also hasn't changed any in the past few days either so I know its not that also because I disabled the firewall with the same result.

[Mauser]

WAT DOES NAT SUPPISE TO MEAN? I HAVE AGENT ERROR PROBLEMS:confused:

Agent Error is same as NAT error.

[Mauser]

Yeah I get an agent error problem... for the past oh, 4 weeks I have been doing just fine playing in whatever server I wanted but every time I did clan war it would give me agent error to everyone.

If it gives Agent Error(NAT error) to everyone then you might not forwarded the right way? Or your opponents din't forwarded.

It also happens that fighting other players that using routers cause problems. This is because the connection got to much delay in both routers.

Clan War games are a bit more laggy then normal games. I cant really help you on this.

[FluffyWolf2]

Replying: My friend can't get it to work and I've port forwarded several games, as Starcraft needed me to portforward on an update due to the port being blocked. So thusly I told my friend how to do this, and he still has problems. Not sure what's the problem here?

Netgear WGT624v3 [something like that] Ports 7700 - 7800 forwarded to his Ip *.*.*.X

[Probes]

Alright here's the problem,
I tried to do this a long time ago, and I use Netgear, and I used GunZ1 as a service name already, now when I try to put it in, it says "Can only use once" and I dont know how to fix this problem. HELP!!!!

[LegendFury]

Wow, I'm surprised no one noticed this yet. Small mistake.

4. At forward page on your router, add the ports 7700-8800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

It should be ports 7700-7800, not 7700-8800.

[Mauser]

@Legendfury, thx. Edited.

[WTPHO]

i tried to forward my port but it still isnt working for me... every room, server, ch I still see other players with 999ping. Occassionally i spike up to 20,000 ping myself

[Silkwyrm]

i would say double check ur settings or just plain get a new router, they're all different.

[boyrune]

ummm i dun get agent anymore but the part when it says click start ,cofiguration i cant understand cuz there in no configuration thing when i click start

[jin]

XD man.. it take so long to do all that and it to hard and i cant them and i dont get what u just said

[Hirosuke]

Their site does not have my router's number code thing...

EDIT: Nevermind I found it... I'm stupid. But, they said they won't let me use the SMC 7004ABR with Gunz... So I went to the default guide and I got to my router's site thing on SMC, and it told me to login and use my password; but...
I don't have a password.

[Mauser]

Their site does not have my router's number code thing...

EDIT: Nevermind I found it... I'm stupid. But, they said they won't let me use the SMC 7004ABR with Gunz... So I went to the default guide and I got to my router's site thing on SMC, and it told me to login and use my password; but...
I don't have a password.

If you dont know your router password, try use the default password. Its mostly Login name: Admin Password: Admin or 1234

If you still cant get into your router, ask the one who installed the router on your network.

If you know how to config a router, then reset it. WARNING!!! don't ever fully reset it if you dont know how to setup your router for your network.

[Snowchill]

Ah, i have the problem with the agent error. It happened and before, but got fixed with the previous update. Today I lounched GunZ, it updated and the problem appeared again. :( I don't have routers, the problem is not in the firewall or antivirus.
Edit: only the windows antivirus is enabled.
Edit2: The error appears only on the DM servers.

[Mauser]

Ah, i have the problem with the agent error. It happened and before, but got fixed with the previous update. Today I lounched GunZ, it updated and the problem appeared again. :( I don't have routers, the problem is not in the firewall or antivirus.
Edit: only the windows antivirus is enabled.
Edit2: The error appears only on the DM servers.

disable it? might got poor connection, in big dm games lag

[Mac2492]

I could play yesterday, but I'm getting Agent Errors today...

Is it a problem with the game or my connection?

[Snowchill]

disable it? might got poor connection, in big dm games lag
It is not that for sure. Today I playd DM with 15 more people on Quest 1 ( which was nearly full when I entered) and there was not lag. :( If the problem is only on the DM servers, I don't care that much, I rarely go there. :D

[hdffffg]

"2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection"

umm.. can some 1 tell me a different way of getting 2 this because i dont see a "Configuration" on my start.

[Addiction]

Vpn ftw, & they just need to make the server run the maps (statics) so people can't edit their map in the folder & run around through walls (no clip), (easly done), I just think ijji are the worst developers in history, same with Maiet.

I could out do their dev skills anyday.
Since when were Ijji developers?

[CreamPuffs]

Please help me, I've tried to portforward but it jsut doesn't work. If you could give me your IM if you have one through a private message or something so that you could walk me through this and see if I'm not doing anything wrong, that'd be most appreciated. I've tried portforwarding by using that website numerous times, but some things are a little different from what I have. Please help.

[own__ed]

this helped ty

[Mauser]

Please help me, I've tried to portforward but it jsut doesn't work. If you could give me your IM if you have one through a private message or something so that you could walk me through this and see if I'm not doing anything wrong, that'd be most appreciated. I've tried portforwarding by using that website numerous times, but some things are a little different from what I have. Please help.

Make sure you got the right router guide, if you still get the problem then contact me with a private message.

[Shinzoo]

Hi, Me and my 2 brother got this problem.

We sit through the same router, and every time we connect to the same game, we like, meld into each other and the NAT doesn't load.

We think it got something with the NAT and IP to do, Even though we given each of us seperate ports on the router and inside the game.

Is it able to play in the same game, cause it would be fun to team up with your brothers or shoot them, or is this a block to prevent any kind of powerleveling?

[Jon]

Well, I do know it is possible for 2 computers to connect through one router (I have played my brother).

[moon22]

hey,i play this game 1YEAR!and at a day i get it!!!that is NOT normal!

[moon22]

i mean,i don't can play gunz,and mine dad say there is NOTHING wrong with the router,so GUNZ is the problem.pls REMOVE that update or the NAT connection...i WANA PLAY GUNZ!!!

[Aerensiniac]

Agent Error is same as NAT error.

The problem is similar but thats NOT true.
Agent error will simply block down all players while nat error lets them connect to you (or you to them w/e) at the cost of +100-150 ping. Also, port forwarding does NOT work with some routers and nobody cares about that problem since 3 years by now. I have a Netgear router (thanks for the manufacturer it sux) and i did EVERYTHING there is to port forwarding, triggering, DMZ and so on. NOTHING works.

Also im starting a topic in bugs section for whatever ijji has done to match server 1 i cannot play any game at it since 2 days because im getting agent errors.

[Nadr]

Remember to open TCP/UDP ports 7700-7800. On your PC, go to Start>Control Panel>User Accounts to verify your account has Administrator privileges. Also be aware that GunZ can only be launched through Internet Explorer.



"Also be aware that GunZ can only be launched through Internet Explorer"


Omg Please make it so we can use firefox! ! !!

[FakerTjeGirl]

Ok this is crap. I've tried all methods for forwarding none helped. I tried my firewall it worked for 5 whole dam minutes and then after those 5 minute i started getting Agent errors again. Please Ijji Fix this big problem. I just bought prems and now i waste them ffs! It all happened with the last update! :cry:

[moon22]

Much Players Got The Same Problem!!!!pls Repair This Sh/t!!!we All Wana Play!!!!!!!!!!!!!!!!!!!

[Aerensiniac]

Much Players Got The Same Problem!!!!pls Repair This Sh/t!!!we All Wana Play!!!!!!!!!!!!!!!!!!!

Agreed and signed, delete that last "patch".
As a side note, i allways wondered how the people on international Gunz managed to implement more problems with a patch than fixes. I seriously do hope ijji doesnt wants to go down on the level of maiet's scrip kiddies.

[Mauser]

Agreed and signed, delete that last "patch".
As a side note, i allways wondered how the people on international Gunz managed to implement more problems with a patch than fixes. I seriously do hope ijji doesnt wants to go down on the level of maiet's scrip kiddies.

I think its still MAEIT that does the script work for ijji, that figures it huh.

@ other
If you got a firewall, turn it off completely while playing gunz. Its better then forwarding..

[Aerensiniac]

I think its still MAEIT that does the script work for ijji, that figures it huh.

Oh god........ i wont wonder about anything from here on......

Btw... firewall wont help, please understand it Mauser. There are dosens of router types wich are not able to resolve with gunz. One of those routers is Netgear, almost all of their products is solid and valuable AND refuses to work with gunz.
Belive me when i say that i tryed EVERYTHING there is, inclusive DMZ and SPI off and NOTHING helped. If you keep up the security fixes you have done with the last patch then you will loose the players wich cant play now, cause this problem cannot be fixed from the player's side.
Im having a long conversation with Netgear about this Gunz issue (lasting since sever months by now) and i ensure you, they made me do everything this router is capable of to get GunZ working. I play with NAT error and (since that fantastic last patch) Agent Error.
Also you can read about this at GunzFactor (simply type Netgear in forum search) and you will see that its not only a "few people's ************************ness" towards routers. So please tell your boss at ijji that either those players go, or they fix the security issue with gunz.

[Mauser]

Netgear

Well, but a new router if u want to play gunz that badly? I got some edimax router, cheap but works fine. U can get these for like 10-20 euro.

For 30 euro u can get a sweex router, they are really good.

Netgear are expensive routers.. those stuff just like linksys got LOADS of options. But for a home network you dont all need that stuff...

And if you port forwarded correctly, it might be a problem caused by the gamegaurd anti hack stuff.

You also can lose the router and connect to your modem directly!

[Aerensiniac]

Well, generaly if i posess a router then its not because im using a single computer, thus droping it means either i cant use the net or the other comps cant. Though i would prefer that you get the flaw fixed by maiet or game guard, after all it kinda sounds low to tell everybody with problems that they are free to buy a new router or computer. Also think of it that there is no guarantee that the next router i buy will work a+ free and then not to mention that this "half working" patch was aproved by ijji.

So all i can do is to request it again here that you fix it cause the problem cant be fixed from the players side, and it's cause lies within the previorus patch, possibly at game guard.

[Mauser]

True but, there isnt that much people with this problem... I mean there still 5000+ players every day that can play normally!

It just sometimes happens that your computer or any related devices are not competable with a game. Tho they should notice it somewhere on the site.

I still believe that your doing something wrong, its a router.. it got port forward function right? Forward the gunz ports.

After that, look for firewall options on your router... turn it off!

After that, look if you got any more firewalls running, including Windows firewall.

Oh ya also make sure, you enterd the right IP from your computer for the forwarding. Like I explained in the guide.

[Aerensiniac]

I still believe that your doing something wrong, its a router.. it got port forward function right? Forward the gunz ports.
Ports 8000-9000 set at gunz - ports 8000-9000 forwarded to 192.168.1.2

After that, look for firewall options on your router... turn it off!
SPI firewall - Disabled

After that, look if you got any more firewalls running, including Windows firewall.
Windows firewall disabled - alg.exe (background operation) termainated
No other firewall/protection softwares exist on the computer

Oh ya also make sure, you enterd the right IP from your computer for the forwarding. Like I explained in the guide.
Fix IP set to adress - 192.168.1.2
Ports 8000-9000 forwarded to 192.168.1.2

Impact on game: 0
All (allready runing games) joined - Nat configuration error
Games created - Fluctuating (Sometimes works, some times not)
Joined newly created game with a max number of 2 players playing - Fluctuating (Some times works some times not)

Overall impact of the Firewall disable in router and in windows: 0
Change to previous experiences: 0

As i have said Mauser there are routers wich simply fail to resolve with gunz. Im getting more and more sure that its caused by the nProtect used by ijji. If you could give me a software to log or collect more detailed information about this i would do it, but as for now the sad reality is that port forwarding does nothing at all.

[Jon]

"Even worse is that some software firewalls continue to block applications even after they've been disabled. So savvy end users who disable their firewall in an attempt to determine whether it's blocking an application are led to believe that the firewall isn't the problem, so it must be the application's fault. And unbelievably, we've even seen ZoneAlarm continue to block applications despite the fact that it has been uninstalled (figure that one out, folks)!" (Nick Bradbury).

Found: http://nick.typepad.com/blog/2006/11..._firewall.html

And here are some things about game gaurd:

http://en.wikipedia.org/wiki/GameGuard
http://www.globalmuonline.com/forum/index.php?showtopic=59070
http://www.mpcforum.com/showthread.php?t=127887
http://www.wilderssecurity.com/showthread.php?t=136414

[Lanthas]

If GameGuard seems to be the error to your 999 ping problem, I'd recommend downloading International GunZ and seeing if you still have your problem. IGunZ uses XTrap rather than GameGuard for hacking protection.

[Aerensiniac]

If GameGuard seems to be the error to your 999 ping problem, I'd recommend downloading International GunZ and seeing if you still have your problem. IGunZ uses XTrap rather than GameGuard for hacking protection.

Xtrap is lethal amount of fail. I stoped with IGunZ cause XTrap got a patch (Improved Security) wich resulted in Agent Error everywhere, every time. Since i left it i didnt check on it though, but it was a very funny patch indeed. Also, Xtrap is known for being unable to handle players from too far distances, thus resulting insane amount of lagg even at ~150 ping. Basicaly 150-200 ping at IGunz was equal to like 800 ping here, so no. Not really

[jwize]

i dont get the part about putting the static IP adress, i followed the portforward.com and in the end it says that if its not on the dot thing then im good to go just close the windows but it says not to skip it, i dont know what to put in the box that says static IP adress i need help


sorry if its confusing im not really good with computer thanks

[jwize]

oh yea i tried skipping the static IP adress thing and i just went to the part where u type ur IP adress on the adress bar and enter ur username and password then i followed everything until the part about putting GunZ1 as the name and clicking enabled and always, and putting 7700 and 7700 on both of the places and then it tells me to click apply but when i do it just tells me that the IP adress is invalid

pls help

[Mauser]

i dont get the part about putting the static IP adress, i followed the portforward.com and in the end it says that if its not on the dot thing then im good to go just close the windows but it says not to skip it, i dont know what to put in the box that says static IP adress i need help


sorry if its confusing im not really good with computer thanks

Its important that you fill in the right IP adress. Static IP means that your IP giving by your router wont change. Just find your IP like said in the guide.

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP adress on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

Just use that IP adress to forward the ports.

[jwize]

ohhh ok thanks alot

[Curtis]

Anyone know how to get to Configuration or do step 2 using Windows Vista Home Premium?

[Jon]

You can:

Start---Run--type cmd---type ipconfig--it will generate your addresses--use the default gateway one.

P.S. do not post numbers or screen shot here...

[jwize]

ok i got another question i did the thing about the virtual server but after gunz6 it says that it doesnt have anymore space to save it, should i keep on going or should i stop?

[GTI16v]

it is your location when it comes to ping

[Jon]

ok i got another question i did the thing about the virtual server but after gunz6 it says that it doesnt have anymore space to save it, should i keep on going or should i stop?

Do you have a dlink? Anyway some routers like the dlink are lame and you can't enter ranges, so you have to enter one port at a time and then the list has a maximum limit. Anyway, you can remove alot of that defualt crap that the router comes with. It is really useless unless you personally use any of those things. By removing that stuff I was able to fit 16 game ports which is all you need.

[jwize]

yea thats wat i have a dlink!, so ur saying i should delete these:

Virtual Server FTP
Virtual Server HTTP
Virtual Server HTTPS
Virtual Server DNS
Virtual Server SMTP
Virtual Server POP3
Virtual Server Telnet
IPSec
PPTP
NetMeeting
DCS-900/DCS-1000
DCS-2000
i2eye
DCS-2000/5300



but im not sure if anyone uses these ports i know i dont is ther a way were i can delete them and put them back if my internet suddenly stops?

[Jon]

Delete all the unchecked ones, if they are unchecked you are not using them anyways.

[jwize]

ohhh ok thanks alot

[jwize]

wtf??? wat is all that random letters??

[Jon]

Ignore that. Has all your problems been resolved?

[FinalxArrowz]

Well, after reading the guide I followed every instruction in portforwarding accordingly to my router. I have done this several times after reading this guide, and only sometimes it works. Sometimes, as in the same repeated steps over and over. But once I shutdown or put my computer to standby position the error occurs again. I have turned down every firewall on my computer and the router firewall. Yet this problem still happends.

[Jon]

I can't think of anything that should result in your router losing it's configuration, other than a failure or someone accessing the setup and changing them. Presuming you're not changing them, I have to believe it's a defective router.Sourceless Qoute

So when you log back onto your router the configuration is gone, or is it still there.

[FinalxArrowz]

Sourceless Qoute

So when you log back onto your router the configuration is gone, or is it still there.

It's gone, after I press save changes.

[Jon]

...Then I would have to say you have a defective router. What router type is it.

[FinalxArrowz]

Linksys WRT54G model

[Little_Pinguin]

Hello,

I was having the NAT problem with GunZ a long time ago. Somebody told me they fixed it (I didn't know which version/developer of GunZ it was. (Anyway it doesn't matter)).
Well, I've read the whole port forwarding thing, have set up an static Ip-adress and done it all. Still it doesn't work.
I have also NAT-errors with programs like Azureus/any Bittorent.

Is it me that is doing something wrong, or is my Draytek Vigor2200E just crap?

[Aerensiniac]

If you cant solve the problem by a correct (if you mess it up then ofcourse it wont work) port forwarding or triggering, then its an incompatibility issue with the anti hack software ijji uses. All you can do is to spam forums, send e-mails and whine till everybody bans you. Maybe after that ijji starts to think about fixing the bug, or telling nProtect about it.
Also, i think this proves my point about "some" router types Mauser. Many people would be happy if your guys could look into it.

[Mauser]

If you cant solve the problem by a correct (if you mess it up then ofcourse it wont work) port forwarding or triggering, then its an incompatibility issue with the anti hack software ijji uses. All you can do is to spam forums, send e-mails and whine till everybody bans you. Maybe after that ijji starts to think about fixing the bug, or telling nProtect about it.
Also, i think this proves my point about "some" router types Mauser. Many people would be happy if your guys could look into it.

I dont think ijji will give details for nProtect GameGaurd, due to hacking problems. Im am not sure, but cause of nProtect there is even more tunneling of connections, making more lag or even nat errors.

If you can't forward gunz with your router, please message me the brand and type. I will further look into it, and list it to maiet and ijji.

[GTwarrior]

Yeah the only problem I have been having on this kinda thing is when I do clan waring like most of the people will have like 999 ping and at least only one person doesn't then my friends have to fight those people all by themselves.

[K0r123]

For all the NETGEAR model users out there:

NETGEAR does NOT work when forwarding ports for gunz. DMZ Doesn't work either. I had a NETGEAR router for a long time, and constantly dealed with having 9/10 players with Agent Error.

I bought a new router that is NOT NEATGEAR and it works.

So, in short, if you have a NETGEAR model router -- Get a new one.

-K0r

[Aerensiniac]

For all the NETGEAR model users out there:

NETGEAR does NOT work when forwarding ports for gunz. DMZ Doesn't work either. I had a NETGEAR router for a long time, and constantly dealed with having 9/10 players with Agent Error.

I bought a new router that is NOT NEATGEAR and it works.

So, in short, if you have a NETGEAR model router -- Get a new one.

-K0r

Incompatibility Rulez

[Mauser]

U should know, all routers that got portforward function is compatible for gunz. Yet not compatible for nprotect/gamegaurd.

Also nprotect/gamegaurd make certain players lag. I will notify ijji about this problem. Also asking for more information about nprotect, it could be that nprotect need to be forwarded as well.

[matilu]

I think it doesnt work and before i just played ijji gunz whitout open the ports :S soo put on a n update that make us all happy and make all of our gunz players play again!!

[Mauser]

I think it doesnt work and before i just played ijji gunz whitout open the ports :S soo put on a n update that make us all happy and make all of our gunz players play again!!

If you got a router, and din't forwarded gunz. The router might used plugnplay or something, tho this might be changed so you have to forward it anyway.

Its always best to forward your router for gunz to play optimal.

[Nooblet-Taco]

Umm when I got to the part where you are suppose to enter your ip in I enter it in and it doesn't do anything it says "Internet Explorer cannot display this page"

[Aerensiniac]

Umm when I got to the part where you are suppose to enter your ip in I enter it in and it doesn't do anything it says "Internet Explorer cannot display this page"

Its of no meaning. Just forward the ports you want to the fix ip you generated.
Thus if you set your fix ip to 192.168.1.2 then forward the ports to the same 192.168.1.2

[Insig]

would someone mind posting screan shots, or mind doing a remote desktop? my email/msn is xavor303@yahoo.com ive tried the portforwarding and i cant get it to work.. =/

[Nooblet-Taco]

Hey does avast! block ports too?

[Amasero]

I've never had a NAT problem ever. Except once I switched to Comcast cable internet and started using this Linksys router, I haven't been able to play with the other computers in my home network. Any way I can get this to work? I've heard that i couldn't, yet in this televised kgunz tournament, (i'm sure many have seen the video: Aplus clan's major collapse and KOR beats them) they're all in the same room playing eachother. So, that just makes me wonder if there really is a way to play gunz with other computers in my home network.. Any help would be appreciated :)

[App]

:confused2:
I went to the forwarding site but it doesnt have the model router that i have.

I have a motorola sbv5120 and its not on the list of motorola router

Help!!!!!!!!!!!!

[App]

help man, on the forwarding site, it doesnt show my model router

[hoi4e]

1234567 ok

[Jon]

:confused2:
I went to the forwarding site but it doesnt have the model router that i have.

I have a motorola sbv5120 and its not on the list of motorola router

Help!!!!!!!!!!!!

Well aparently that is not a router; it is a modem.
Two possibilities:
1)You have a router between your computer and that modem.
Or
2)Your ISP is messing with your modem's configuration:
http://forum.portforward.com/YaBB.cgi?board=Knowledge;action=display;num=113920 3595

[Toadzter17]

Remember to open TCP/UDP ports 7700-7800. On your PC, go to Start>Control Panel>User Accounts to verify your account has Administrator privileges. Also be aware that GunZ can only be launched through Internet Explorer.

Or through Mozilla Firefox using the IETab plugin.
https://addons.mozilla.org/en-US/firefox/addon/1419
Download, restart the browser and click the little icon in the bottom right hand corner of the browser. If that isn't simple enough for you then don't use it.

[Squeezerke]

I dont know if this is the NAT error (Agent Error) because it doesnt show in the game.
Everyone gets 999ping i cant kill or damage any player , bud they can kill me. They dont see me in the game and dont see what i typ in chat. And i get message when joining a server ''NAT network configuration: <player name>'' of every player except me.

Is this the Agent error u guys are talking about or is it something else that can be solved easy?

[Jon]

Have you port forwarded yet?

[Squeezerke]

yes i have

[Jon]

Assuming you did it properly: set up static ip, used the computer address, and set both UDP and TCP. You could try opening these ports in your firewall UDP/TCP. Do you get this with everyone? This isn't agent error, and you won't get a NAT configuration with yourself.

[Squeezerke]

I opened 7700 - 7800 UDP TCP in firewall didnt work, i turned down firewall didnt work.

Maybe this pic will help
http://img442.imageshack.us/my.php?image=gunz000fm8.jpg

[Jon]

To be honest I don't know then. Three things that may be causing it are: ISP, modem, router. Some routers have a advanced setting called gaming mode that needs to be enabled (I had to turn it on with my DLink).

[StealthBeast]

In the terms of usage:
-----
12. System Requirements
Part of our mission at the Site is to provide free, high quality games. This entails the use of hardware, software and internet access. By using the Site, you acknowledge that hardware, software and internet access play a crucial role in your user experience. You agree that NHN USA is not responsible for any hardware, software or internet access or unavailability issues and you agree to hold NHN USA harmless for any such issues.

You are solely and completely responsible for the cost of all telephone and Internet access charges along with all necessary equipment, servicing, repair or correction incurred in maintaining connectivity to the Site or Service.

13. Server Outages
There will be regular periods of server maintenance as well as spot maintenance, usually coinciding with a new game or new service. NHN USA will do its best to limit server down time to ten hours. However, NHN USA is not liable for any loss of usage or data experienced as a result of maintenance or other down times and you agree to hold NHN USA harmless for any such loss.

NHN USA will not be responsible for a user's inability to access paid services during server maintenance.

NHN USA shall not be liable for any delay or failure to perform resulting from causes outside the reasonable control of NHN USA, including without limitation any failure to perform hereunder due to unforeseen circumstances or cause beyond NHN USA’s control such as acts of God, war, terrorism, riots, embargoes, acts of civil or military authorities, fire, floods, accidents, strikes, or shortages of transportation facilities, fuel, energy, labor or materials.

Further, we cannot and do not promise or ensure that you will be able to access your Account whenever you want, and there may be extended periods of time when you cannot access your Account. You assume the entire risk as to the results and performance of the Software and the Game in connection with your hardware and software, and you assume the entire cost of all servicing, repair and/or correction of your hardware and software.
-----

So... theres not really a reason for them to help us netgear users, as even paying customers already agreed that they imdemnify 'em regardless if they can access their account or not.

So now the real question is: Are they ***holes? or do they really do care about us?

EDIT:

Wait a minute... NHN USA will not be responsible for a user's inability to access paid services during server maintenance.

We may have a case here lol

[Mauser]

In my opinion, if you cant play the game probrally... like with netgear routers.. you shouldnt buy premiums =,=

[Vlades]

Err..i have thee same problem...well i played gunz 2 moth bac and it was going good..Now i go in and i see all the players hawe 999 ping...what should i do..The site doesnt have my router...

Thank you..waiting for a ansewr

[StealthBeast]

To be honest I don't know then. Three things that may be causing it are: ISP, modem, router. Some routers have a advanced setting called gaming mode that needs to be enabled (I had to turn it on with my DLink).

what is this "gaming mode" that you speak of...

[ancientgod]

[4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.
]i dun understand this part.number 1-3 i got do le including static ip address

[StealthBeast]

LIST OF QUOTES FROM PEOPLE WHO TRIED THIS AND IT DIDN'T HELP THEIR PROBLEM:

Replying: My friend can't get it to work and I've port forwarded several games, as Starcraft needed me to portforward on an update due to the port being blocked. So thusly I told my friend how to do this, and he still has problems. Not sure what's the problem here?

Netgear WGT624v3 [something like that] Ports 7700 - 7800 forwarded to his Ip *.*.*.X

i tried to forward my port but it still isnt working for me... every room, server, ch I still see other players with 999ping. Occassionally i spike up to 20,000 ping myself

Ok this is crap. I've tried all methods for forwarding none helped. I tried my firewall it worked for 5 whole dam minutes and then after those 5 minute i started getting Agent errors again. Please Ijji Fix this big problem. I just bought prems and now i waste them ffs! It all happened with the last update! :cry:

Oh god........ i wont wonder about anything from here on......

Btw... firewall wont help, please understand it Mauser. There are dosens of router types wich are not able to resolve with gunz. One of those routers is Netgear, almost all of their products is solid and valuable AND refuses to work with gunz.
Belive me when i say that i tryed EVERYTHING there is, inclusive DMZ and SPI off and NOTHING helped. If you keep up the security fixes you have done with the last patch then you will loose the players wich cant play now, cause this problem cannot be fixed from the player's side.
Im having a long conversation with Netgear about this Gunz issue (lasting since sever months by now) and i ensure you, they made me do everything this router is capable of to get GunZ working. I play with NAT error and (since that fantastic last patch) Agent Error.
Also you can read about this at GunzFactor (simply type Netgear in forum search) and you will see that its not only a "few people's ************************ness" towards routers. So please tell your boss at ijji that either those players go, or they fix the security issue with gunz.

Well, after reading the guide I followed every instruction in portforwarding accordingly to my router. I have done this several times after reading this guide, and only sometimes it works. Sometimes, as in the same repeated steps over and over. But once I shutdown or put my computer to standby position the error occurs again. I have turned down every firewall on my computer and the router firewall. Yet this problem still happends.

Hello,

I was having the NAT problem with GunZ a long time ago. Somebody told me they fixed it (I didn't know which version/developer of GunZ it was. (Anyway it doesn't matter)).
Well, I've read the whole port forwarding thing, have set up an static Ip-adress and done it all. Still it doesn't work.
I have also NAT-errors with programs like Azureus/any Bittorent.

Is it me that is doing something wrong, or is my Draytek Vigor2200E just crap?

For all the NETGEAR model users out there:

NETGEAR does NOT work when forwarding ports for gunz. DMZ Doesn't work either. I had a NETGEAR router for a long time, and constantly dealed with having 9/10 players with Agent Error.

I bought a new router that is NOT NEATGEAR and it works.

So, in short, if you have a NETGEAR model router -- Get a new one.

-K0r


I opened 7700 - 7800 UDP TCP in firewall didnt work, i turned down firewall didnt work.

Also, I too sucessfully portforwarded, and played with DMZ, with no effect to my AE/NAT problem.

LIST OF QUOTES FROM PEOPLE WHO TRIED THIS AND IT DID HELP THEIR PROBLEM:

Great, thanks man!:clap: :thumbsup:
:gj: :gj:

I have a shtty router that doesnt even include manuals how to do portforwarding with it, but thnks to portforward.com i found a way to do it.
Now I should be able to play at the same time while my brother is playing without the redicolous pings.
weeeeee

Note that he said "should", which implies he didn't test it yet...





Is it fair to say that ports have little to no relevance to AE/NAT for the people who have the problem?

So what the HELL is this still doing stickied?

[Cookie n'Cream]

Ok so... I dont get the part where u have to enter a username and password... what username and password do i enter in? I dont understand which one i am suppose to put in there.

[SpookyJaw]

Omg, this is my exact problem ty ^^ Btw my ip is a tad different, is that cos im from uk?

[hunter007]

ok, so i did everything and it still doesnt work. BUT im on wireless internet should that matter at all?

[StealthBeast]

ok, so i did everything and it still doesnt work. BUT im on wireless internet should that matter at all?

Only if it's a netgear router.

[cipher]

will enableing my static NAT do anything?

i only have the 999ping problem in clan wars btw. i tried port forwarding and it still doesn't work

[Musashii]

ok here is my prob.

i have a linksys wrt54g model router, and i assigned static ips to to comps accoarding to the guide posted by ijji. now when i go to portfoward, i put gunz 1 6800 ~ 7800 both IP ADDRESS *check mark*

now that is for my comp, but when i go to put it on my brothers comp i get an error message saying conflicting ports or somethin along the lines of that. i get a nat error on my bro and our ping is like 120 when we play, and besides distance nat errors i dont get erros but my brother does sometimes.

help?

plz pm me

[Mauser]

You cant play against each other on 2 computers in the same home network.

But if you wanna forward both computers, use ur bro's ipadress and use DIFFERENT PORTS. Probrally wont work well on same ports.

[Musashii]

but see i can play against him, we both have diff static ips its just our pings to each other are like 100 and everyone else's pings are like 30-60 lol. i just wanna know if i could fix our pings, also u said foward his ip to another port.. any suggestions which port.

[Freya]

Netgear and linksys routers dont to seem to work with gunz/nprotect(gamegaurd)


Really no way to fix this? =( Sucks so much I crave to play gunz! I don't know what'll happen if I change router I have to set up internet and things again? >.>

[hunter007]

This is seriously bull crap, please fix this, ive portforwarded about 3 times now and it does not work.... why in the world is this stickied? Find a better solution please because this obviously does not work and a lot of people cannot play.

[MasterM]

what if my router isn't there?

[Jon]

Post your model and someone will try to find you a guide.

[MasterM]

my router is a Arris model TM502G

[O_Naruto_O]

Wow Wow Wow. I am going to use this guide ;P

[O_Naruto_O]

Ah it don't work for me. I am just going to forget about lol, I don't have this porlbme anyways ^_^

[skilledhero]

I dont have a router what is in a list :(

[skilledhero]

router is speedtouch 760wl

[rexha91]

when i go to add a port to my firewall i don't know what do type in, it wont let me put "-" or "~"

[cerv]

when i go to add a port to my firewall i don't know what do type in, it wont let me put "-" or "~"

it is explained on portforward.com... > firewalls..

Anyway, my router name does not appear in the list of routers on portforward.com.. If any1 has a solution. I'll do anything to fix that damn NAT error.

[StealthBeast]

LOL! This junk is still stickied?

man... i quit gunz a little bit ago over this. At least until i get a new router (if ever... i mean... why the hell would I?)

If your an admin reading this message, please delete this topic already, theres not a single post from someone in the entire 13 pages of this topic who had this problem, forwarded their ports, and posted of their success. You can look at every single page yourself if you don't believe me, or you can view my compilation on page 11 ( http://forums.ijji.com/showthread.php?t=594&page=11 )

[Killer_die]

lol This is nice thread

[skilledhero]

i cant stop playing gunz too good!!
But i have AE :(

[FeaRoFMyANgeR]

guyz i have a prob.I have fix portforwarding and have put gunz in windows xp firewall but i still get an error when i get in a game "Agent error:agent not available" can anyone tell me what i should do about that?:/

[MadCroco]

Hehe, I've tried to portforward my router, for (Warcraft III: The Frozen Throne) to HOST some custom games in it. I got all succesfully done, except my missing Nick and Password for the administration panel (router IP on my address bar). Well.. that's life :s

[axelrose]

wat the heack every time i loge in people just5 stand there i dont no wat to do some one hlep me an replay pleze or ill stat to :cry: waaaaaaaaa cry

[mxdan]

Thanks for this, I found it useful.

[HarlequinLaughter]

If you experience AGENT ERROR... I can help you!
There are some simple things to do first.... TURN OFF ALL ANTIVIRUS AND FIREWALL SOFTWARE!!!
some of it blocks ports and GIVES YOU NO WAY TO STOP IT.... turn it off... at least while playing gunz!

second... Add *.ijji.com to your trusted sites (in security tab of internet options (under tools,internet options, security tab, click on trusted sites, click sites button, type *.ijji.com at top, then click add,then close, then apply))- This will also fix PLAY NOW BUTTON errors...

Now move on to port forwarding....which nowadays also needs to be set on your MODEM!!! most modems (DSL & Cable) now have built in NAT which you will need to disable, forward, or set to use DYNAMIC ROUTING... (type based on your router)... send me messages with your equipment types and I can help!!!

DON'T GIVE UP!!! there is always someone like me who can MAKE it work!!!!

or you can always try me on Quest Server 3, as Legon-air

[Musashii]

only after this new update i get agent errors... b4 i got nat configuration. i dunno what happened but now most the ppl i used to play with i cant.

[NightHawkXTD]

Having trouble with Agent Errors? Portforwarding not helping? Want to play GunZ?

Check out my thread (Possible fix for Agent Error) and see if it helps.

http://forums.ijji.com/showthread.php?t=38747

[spazman]

will this fix the 114 error? is that what it's talking about? o.o

[SabakuGaara]

I portfowarded my router (SAFECOM) and it didn't work... This is quite annoying because I want to do something to my time and I can't play gunz since MAIET, more like ever because of this Agent Error.
If anyone can help me with something that actualy works with this... But I believe ijji should talk with MAIET staff and ask for a downgrade or a de-patch because this "upgrade" or "patch" isn't helping or fixing anyone...

[Lotuz]

I've got a Linksys Router, port forwarded, and still not working for me. Anyone found a fix for Linksys Routers yet?

[Lotuz]

Everyone that has a Linksys Router, I found a fix. Go into your router settings (192.168.1.1 password is admin) and disable your router firewall. Problem fixed!

[AmFBanan]

Help me anyone I have problems!I click start game gunz and see this"GameGuard initialization error. Try rebooting and executing the game or close the programm considered to cause a collision."HELP ANYONE! Send me to my email amfbanan90@hotmail.com!THANKS!

[Musashii]

aim v6, or aol instant messenger version 6, closes if u open gunz up, and windows defender closes certain processes if it tries to run on your system, since gamegaurd is "a trojan" or so people call it, try to exit out of your windows defender, now as for aim, exit out before you even connect to the play live button, now a few post up, ther is somethin on firmware, get ur firmware and upgrade, get ur comp with a static ip, and port foward, and u wont ave nat anymore, btw i use linksys wrt54g router. and linksys is apparently not supported but mine works fine now

[Masterthief1324]

Simple guide to portforwarding.

When you got a router (http://en.wikipedia.org/wiki/Router) in your network you need to config your router to prevent NAT errors.
Your router blocks certain ports that gunz need to connect to other players. To open these ports and stop NAT errors follow this guide. Nat error is also known as Agent Error.

1. Find your router device, and write down the brand and type(number).

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

3. Go to portforward.com (http://www.portforward.com) and search at PortFoward your router. Here you can find a guide on how to forward your router.

4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

5. Now your done, test it on gunz :)

Extra/important:
Firewall software block ports also. Open your firewall software and search options to open ports. Or turn off the firewalls while playing gunz. This includes Windows Firewall.

Netgear and linksys routers dont to seem to work with gunz/nprotect(gamegaurd)

For questions you can post in this thread, tho the help you recieve is by other forum members. (I am not active on this forum anymore.


I'm getting these problems. When I log into a room, Usually with rooms more then 10 people, my ping goes up to 2000's for some reaons. I think it might be that. I'm using dsl, w/ a modem model westel 327. I can't seem to find my modem in port forwarding.

[Cesar_king]

Simple guide to portforwarding.

When you got a router (http://en.wikipedia.org/wiki/Router) in your network you need to config your router to prevent NAT errors.
Your router blocks certain ports that gunz need to connect to other players. To open these ports and stop NAT errors follow this guide. Nat error is also known as Agent Error.

1. Find your router device, and write down the brand and type(number).

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

3. Go to portforward.com (http://www.portforward.com) and search at PortFoward your router. Here you can find a guide on how to forward your router.

4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

5. Now your done, test it on gunz :)

Extra/important:
Firewall software block ports also. Open your firewall software and search options to open ports. Or turn off the firewalls while playing gunz. This includes Windows Firewall.

Netgear and linksys routers dont to seem to work with gunz/nprotect(gamegaurd)

For questions you can post in this thread, tho the help you recieve is by other forum members. (I am not active on this forum anymore.

Ok.... Your instructions are really great and this might work for people but not me.
You lost me on "Configuration". My computer does not have this "Configuration", I don't know if its because it might be different or im just an idiot ^^. Well i hope you know what I'm talking about and if you do. please raply ^^ Thank You.

[T3h_Joker]

I have a Wireless-G Broadband Router that is a brand of Linksys...

Does that mean I can't port foward?

[BeAtMaN]

I'm not sure about the port thing,but the weird thing is when I very first played GunZ,which was about 2 days ago.The game worked PERFECTLY.I mean I didn't have to put in any ports,I didn't have lag AT ALL.The first time I ran the client,it was smooth.I did about 3 to 5 games.I exited out of the client.And later I came back and it's all lag now!

[Rachel]

God it's been forever. I seemed to have forgotten my username and pass for the silly port. Damn..

[StealthBeast]

Would you guys just unsticky this topic already?!

There isn't a single post in this topic from someone who did this and found that it worked. NOT A SINGLE PERSON!

For real, go ahead, and look through all 15 pages and you won't find

ONE

person say that this fixed their problem.

[elston0]

That fixed my problem Ty

[hate2bu]

*frowns* i have linksys. so i cant do anything at all right now, right?

[Gazpoole]

I used to get NAT connection settings thing to every player in the game, giving me 150-200 ping to even people in my own country.

I did some port forwarding stuff and that, and it made it less frequent (to say, 75% of people get NAT).

I'm using Netgear WGTsomethingsomething, did that little bit at the end of the first post mean that there's nothing I can do about my horrible ping? Port forwarding has definitely made a difference, just not enough of one.

-Gary

[StealthBeast]

That fixed my problem Ty

first reply in this whole topic that says this solved the problem

[Static_Kill]

Of Course I have one of the routers that dosen't work with gunz... Always seems to happen to me download a game but can't play it for some annoying reason. :doh:

[skilledhero]

Does any1 know how to PF speedtouch thomson 780wl??
IM a huge gunz fan but i get AE

[Brinkman]

So wait. If I have a linksys router I'm screwed? :mad:

[Squeezerke]

Im 100% sure that nProtect GameGuard this is causing because i got Nat error on most of the games i play with nProtect.

[Grnddragn32]

this didn't help my brother's nat prob, but it did decrease my ping... so thanks for that...

but anyway, can anyone explain this? my comp works fine. my bro, who is on the same router, gets agent errors frequently. he has to installed firewalls and i've portforwared him and everyone he plays with. this solved the problem for about half an hour xD

any help?

[Tomy8m2]

Um...... I only have 1 DNS server and no erferred DNS server wat is wrong? But thanks anyway.

[valdomad]

Simple guide to portforwarding.

When you got a router (http://en.wikipedia.org/wiki/Router) in your network you need to config your router to prevent NAT errors.
Your router blocks certain ports that gunz need to connect to other players. To open these ports and stop NAT errors follow this guide. Nat error is also known as Agent Error.

1. Find your router device, and write down the brand and type(number).

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

3. Go to portforward.com (http://www.portforward.com) and search at PortFoward your router. Here you can find a guide on how to forward your router.

4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

5. Now your done, test it on gunz :)

Extra/important:
Firewall software block ports also. Open your firewall software and search options to open ports. Or turn off the firewalls while playing gunz. This includes Windows Firewall.

Netgear and linksys routers dont to seem to work with gunz/nprotect(gamegaurd)

For questions you can post in this thread, tho the help you recieve is by other forum members. (I am not active on this forum anymore.
----------------------------------------------------------
well i did everything u told me but in some servers it doesnt work:no:
i own a thomson-alcatel speedtouch780WL and i postfowarded it as u told but i still get agent error on Quest 1 and 2 the others work well but my clan is in Quest 2 and id like to play there to, so please help me

[HeLp128]

is this why when i try to download gunz it says data currupted?? plz if its not tell me how to download it

[Aerensiniac]

Would you guys just unsticky this topic already?!

There isn't a single post in this topic from someone who did this and found that it worked. NOT A SINGLE PERSON!

For real, go ahead, and look through all 15 pages and you won't find

ONE

person say that this fixed their problem.

HAHAHA OH WOW
I lold, but fo real, it would be nice if the admins and forum oderators would understand that their sh*ty game guard is incompatible with a lot of routers, ergo PORT FORWARDING WONT DO A FU*KING THING. I have been into forums like this for years, the creators are either still too stupid to understand the problem or just care sh*t about it.

Netgear still sucks with gunz, all the way down. Even the manufacturer couldnt tell me whats the problem so it would be nice to look into game guard and the so called bull sh*t of data tuneling.

[vi3thustla]

nice guide

[Nalfang]

Simple guide to portforwarding.

When you got a router (http://en.wikipedia.org/wiki/Router) in your network you need to config your router to prevent NAT errors.
Your router blocks certain ports that gunz need to connect to other players. To open these ports and stop NAT errors follow this guide. Nat error is also known as Agent Error.

1. Find your router device, and write down the brand and type(number).

2. Write down your computer IP and your Router IP(default gateway).
To do this:
-Go to Start, Configuration, Network, Open your LAN connection.
-At details of LAN, you can see your computer IP on top of the list. Mostly 192.168.2.100 or something.
-Also can see your Standard Gateway. Mostly 192.168.2.1 or something.
-Write these down.

3. Go to portforward.com (http://www.portforward.com) and search at PortFoward your router. Here you can find a guide on how to forward your router.

4. At forward page on your router, add the ports 7700-7800(Standard ports, adjustable at gunz>options>misc) for your computers IP. Click add or ok to save it.

5. Now your done, test it on gunz :)

Extra/important:
Firewall software block ports also. Open your firewall software and search options to open ports. Or turn off the firewalls while playing gunz. This includes Windows Firewall.

Netgear and linksys routers dont to seem to work with gunz/nprotect(gamegaurd)

For questions you can post in this thread, tho the help you recieve is by other forum members. (I am not active on this forum anymore.
btw THEY DO THEY JUST HAVE CRAPPY CONNECT ON EVERYTHING... i really need a static ip

[Bloodcult]

i get the agent error without a router..i use a modem..?or are they the same thing?sorry i ain't too techy.

[Arkelon]

hey i am having router problem for gunz i can't seem to fix the 999ping i get from everyone i have tired portforwarding but it didn't work and also this is a new router we got also when i am playing i don't get the net config and i also don't get the agent error i don't get either for some reason alls it does is everyones ping goes to 999 and i am not sure how to fix it please help

[-+MAeSTRO+-]

dam! i got netgear!

[jisito]

emm GM help me to get the error away.i'm having a error when i close my gunz....there will be a pop up saiding mermory cannot read this file......

[Morm]

My linksys wrt54gs works fine. Recently Gunz began showing up in my upnp log. so either they just introduced that feature or one of my router firmware updates has added support for Gunz. BTW I use dd-wrt firmware version 24 RC3 on my router and not linksys's.

[BlueDragon™]

i get the NSIS error.

[_Aes_Sedai_]

K, I am not sure about anything with routers and all, but what would happen if I disabled nat in my router?

I used to get the nat/ae error all the time along with rampant dcs, but after a while it went away for no apparent reason. Not a single setting had been changed on my computer or router.

Oh how I long for that to happen again. My isp screwed with stuff and had to re-sync my internet. Now I have the problems all over. ahhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh!!!!!!!!!!!!!!!!! !!!!!!!!!!!!!


Notice:
All you lynksis users. Turn off the firewall on the router or upgrade your firmware. "Ya, but Aes if I turn the firewall off my comp will be open to many horrible things." Oh shut up, you can turn the windows firewall back on and your antivirus, as long as it doesn't want to update in the middle of play.
Needless to say I solved my problem!!!!!!!!!!!!!!!!!!
AND YES I FOUND THIS STICKY/THREAD/WHATEVER IT IS HELPFUL

[spike89]

i dont understand the configuration part. when i press start,there is no configuration. please help.

[_Aes_Sedai_]

Spike if you are talking about finding your IP, then go to
start > run > command (alternatively you can go start > all programs > accessories > command prompt).
Once you have the prompt open type
"ipconfig /al" (no quotes btw).
all the info you need will be right there.

Now if your talking about setting up the static ip, thats in network connections. right click your main connection, go to properties. Under the general tab you will see internet protocol (Tcp/Ip). Click that and then click properties.
I hope that helps.




Addendum to all you linksys users. disregard what I said earlier. Turning off the firewall and upgradeing the firmware helped for about a day.
I think I may cry.
I have tried forwarding, triggering, udnp (or whatever that is), and anything else that makes programs bypass my router firewall and connect to or from the internet.
Nothing works!

Just as a side note. Linksys is one of the main providers of routers in the U.S., so why in the world would someone make a program that is not compatible with Linksys routers and then nnot fix it when the problem is brought to light? (cough cough nportect cough cough)

[berriesncream]

i dont get it i dont have a router and im still NAT but the thing is i can see everybody and they can see me so im not agent and because of that i cant cw cause i cant see the other guys

[Akidzuqi]

ok so this is the problem when im going in game I choose server, choose character all goes perfectly....
chose room (no problems yet), and when game is loaded i can play a bit (sometimes 5 min some times 20sec) and then game freezes and when I'm still able to move i have 0 ping...
(while Im still not freezed i can see ppl and they can see me i can kick them ************ and they can kick my) as i understanded the reason of my problems (game freezing and non able to do anything only restart pc)
is becouse of this 0 ping... Im not connect at 100% or something? O.o (I'm not good a this stuff)
So Its A NAT Error????? and anyone can help me with something?
couse I dont get it in Guide how its done..... so any coments with advise???


Anyway I'm now going to my internet provider to consult with them how to done it..
and if I will be able to do something Il tr to explain to other ppl....
but meanwhile please any comments how to fics it if anyone know..


P.S Sorry for my english

[aBcy]

i got that error for a week and in quest 1 and it's just becoming normal again xD
something like that >_<

[_Aes_Sedai_]

ok so this is the problem when im going in game I choose server, choose character all goes perfectly....
chose room (no problems yet), and when game is loaded i can play a bit (sometimes 5 min some times 20sec) and then game freezes and when I'm still able to move i have 0 ping...
(while Im still not freezed i can see ppl and they can see me i can kick them ************ and they can kick my) as i understanded the reason of my problems (game freezing and non able to do anything only restart pc)
is becouse of this 0 ping... Im not connect at 100% or something? O.o (I'm not good a this stuff)
So Its A NAT Error????? and anyone can help me with something?
couse I dont get it in Guide how its done..... so any coments with advise???


Anyway I'm now going to my internet provider to consult with them how to done it..
and if I will be able to do something Il tr to explain to other ppl....
but meanwhile please any comments how to fics it if anyone know..


P.S Sorry for my english




You always have zero ping when you push tab, because you don't ping your own computer. I don't know if it is a NAT error. I have no idea why the game would freeze like that though. The game may just be to much for your computer.

[_Aes_Sedai_]

i got that error for a week and in quest 1 and it's just becoming normal again xD
something like that >_<

Ya that happened to me when I first installed gunz. The problem just disappeared after a while, but it wasn't an update of the game that did it. Just in a random moment everything said "lets stop sucking at life"

[Akidzuqi]

The game may just be to much for your computer.

Are u sireous???? thats not funny I used to play in L2 with two windows listen music and talk in microphone with friends in skype..... and u saing that just a regular game is to much??? i dont think so...

and actually I've I won this fight with NAT ERROS (actually it wasnt a nat problem
it was my damn firewall in system gha i have 2 firewalls one regular and other in my connect system
so just turnning off my firewall wont help so ive maked all exception in gunz stuff and now im okey almost

[_Aes_Sedai_]

LOL, I am happy to here that you fixed it.

[Akidzuqi]

Yes its cool but now i have other thing whenever i connect it's so damn lagy
when I'm start round i can play a bit then I see black screen and i can see myself and other characters
and thats all any ideas how to fix it?

[_Aes_Sedai_]

How much ram do you have, and how much free space on your (insert size) hard drive do you have?

[Akidzuqi]

512 ram and 1 gb free =))))))) space on master HD

[_Aes_Sedai_]

That could be your problem. The lack of temporary storage may be causing you graphics card to freak, which in turn causes your computer to crash. Gunz like a lot of space and/or a lot of ram. when I have it installed I have at least 3 gigs on my hard drive free, and I always have 2gigs of ram.

[Dark bane]

I dont have a router my lil brother broke i have a modem wth do i do to fix this thing for me plz tell me tired of getting bored plz help me plz :(

[Rusty Dagger]

Some reason i cant play with my lil bro.
Dont know if is because of my iP or what so ever.
I NEED HELP!
:please: :please: :please:

[sowterG]

well i have netgear so wtf i do ++ i tried portfowarding before but my pc says i dont have an ip it just has box that says find ip automaticly with a tick in it and if i un tick it there nothing in the ip box and my net is slow enyways downstairs we got 100.mps up here i have 54.0mps and its realy crap so i dont what to do can enyone help me?

[_Aes_Sedai_]

Some reason i cant play with my lil bro.
Dont know if is because of my iP or what so ever.
I NEED HELP!
:please: :please: :please:

There is a stickie on that my friend.

well i have netgear so wtf i do ++ i tried portfowarding before but my pc says i dont have an ip it just has box that says find ip automaticly with a tick in it and if i un tick it there nothing in the ip box and my net is slow enyways downstairs we got 100.mps up here i have 54.0mps and its realy crap so i dont what to do can enyone help me?

I have to go somewhere, but when I get back I will answer you probably.

[Rusty Dagger]

[QUOTE=_Aes_Sedai_;905951]There is a stickie on that my friend.

Well..i know..but dont get it..
:doh: :doh: :doh:

[skyhigh_guan]

Yo, pro assitant, i have problem with my D-Link router the model is DI-604 please help out i go to DMZ i dont know what to do? mind those pro add me please and teach me please

[sowterG]

well mines automatic mostly,i have that new belkin router i bout it yesterday ebcous ei had netgear but the port forwrding doesnt wokr for it like us aid enyways i just put in the 192.168.2.1 in adress bar goes to setup home DONT! put it in google you get nothing well nothing sueful eithe rthat or with your router u shud get a intalation cd with mine i can go to menu then manual setup and clik on software settings and i can alter my security settings and open ports etc.

enyways i aslo wanted to ask does enyone now what i ahve to set the ports at for sf cuz i get liek 180 ping on sf wann now how i can sort it out.

[_Aes_Sedai_]

well mines automatic mostly,i have that new belkin router i bout it yesterday ebcous ei had netgear but the port forwrding doesnt wokr for it like us aid enyways i just put in the 192.168.2.1 in adress bar goes to setup home DONT! put it in google you get nothing well nothing sueful eithe rthat or with your router u shud get a intalation cd with mine i can go to menu then manual setup and clik on software settings and i can alter my security settings and open ports etc.

enyways i aslo wanted to ask does enyone now what i ahve to set the ports at for sf cuz i get liek 180 ping on sf wann now how i can sort it out.

Ports are 7700-7800 if you use the default and you have set up a static IP. The default adress for your router is usually 192.168.1.1 not 192.168.2.1.

[Komaru]

How do I do this on Vista?

[I_owned]

Omg, this is my exact problem ty ^^ Btw my ip is a tad different, is that cos im from uk?

Every connection in a different location has it's own unique IP adress.

[Wizkid]

ok so if i have linksys i can never get rid of agent error?!?!?!?

[_Aes_Sedai_]

ok so if i have linksys i can never get rid of agent error?!?!?!?

You need to upgrade you firmware, port forward, and pray. AE and any DC may go away after time. thats what happens to me when I have to reset stuff.

[KStyler4Life]

...What? Mauser I did not get what you meant by that port forwarding thing..plus the portforward.com website is confusing :confused2: I mean you gotta know whats this and that.. it's real confusing so please help me.. and everytime I go on GunZ people say this "lagger" "hacker" Idk why.. and whats the NAT Connection from : (whatever) ? Sorry for asking so many questions but I'm not sure with the IP addresses and stuff, so PLEASE help me.

[clum]

For all the NETGEAR model users out there:

NETGEAR does NOT work when forwarding ports for gunz. DMZ Doesn't work either. I had a NETGEAR router for a long time, and constantly dealed with having 9/10 players with Agent Error.

I bought a new router that is NOT NEATGEAR and it works.

So, in short, if you have a NETGEAR model router -- Get a new one.

-K0r

Biggest load of crap i have ever heard, i have a netgear DG8348G and gunz works absolutely fine, no portforwarding of any sort. Just turn on UPnP

[Gigabytes]

So this doesnt work with LINKSYS because i ahve played gunz many times and i have linksys so whjat should i do?

[Plasma]

Ok I have a new problem. I started in IGunz,I switched ,because of the Agent error thing. Ijji has worked awesome for a long time. But recently,it stopped working,I port forward and work fine until yesterday. I get the same agent error thing,but it doesn't say agent error. Now I'm stuck with the same problem,but I can't fix it.. I am using a Linksys router-WRT54G.PLEASE HELPETH ME

[_Aes_Sedai_]

So this doesnt work with LINKSYS because i ahve played gunz many times and i have linksys so whjat should i do?

Make sure you have the latest firmware and you still need to forward the ports.

Ok I have a new problem. I started in IGunz,I switched ,because of the Agent error thing. Ijji has worked awesome for a long time. But recently,it stopped working,I port forward and work fine until yesterday. I get the same agent error thing,but it doesn't say agent error. Now I'm stuck with the same problem,but I can't fix it.. I am using a Linksys router-WRT54G.PLEASE HELPETH ME

The only thing I can tell you is make sure you have done it right, and make sure your firmware is the latest out. Hopefully it will go away. It does for some people over time. XD

[Dryan]

Hello i'm spanish,so sorry for my english mistakes, I changed my router form telefonica to Ono, so now, I have a scientific Atlanta webstar 2320, I did all you say in that guide, at the begining playing gunz, and before do the guide's steps, I've seen players like disconnnected, but now, after do the guide's steps, i can see players moving, but they don't attack me, and when I shoot them, they don't receive any damage. I think they see me like disconected and I can't still play correctly.

Can someone help me?

Thank you for read my post.

Yours sincerely.

[Fantasy_Rey]

very nice guild about the NAT problem but it wont work for me or i am doing it rong maybe you can help me because i get alot of NAT problems with gunz and already bought a new router.

The router i got is a Linksys BEFSR41v2.4
http://i57.photobucket.com/albums/g223/7rey7/Routerproblem.jpg

http://i57.photobucket.com/albums/g223/7rey7/Routerproblem2.jpg

on screenshots you can see what i have done already with the router settings.

Tell me plz if i forgot something or did something rong..

[_Aes_Sedai_]

The app name should be "Gunz1" not "HTTP." Other than that it looks fine to me. Realize that you have a linksys, which is not completely compatible with gunz for what ever reason. Make sure your firmware is up to date as well.

[Fantasy_Rey]

The app name should be "Gunz1" not "HTTP." Other than that it looks fine to me. Realize that you have a linksys, which is not completely compatible with gunz for what ever reason. Make sure your firmware is up to date as well.

Okey tnx, btw how can i update firmware ?

Firmware Version: 2.00.1 atm


*EDIT* he man it realy worked tnx :)
Finely no more NAT problems :)
+rep for ya

[GunZ Maniac]

Bleh i got lost at when u go to the gunz part. i got lost at this part..


http://www.portforward.com/english/routers/port_forwarding/Comcast/CG814WG-comcast/GunZ.htm


i didnt know how to set up a external ip adress and i dunno how to get onto my routers website becuz i lost my manual! LIFE SUCKS! man...On gunz i get these spikes which i cant feel to like 400-10k ping...and it goes to like 60-110 in duels..im so confused....any suggestions?

[2pac_2]

Is there away to block everyones Port besides Can and USA?

[_Aes_Sedai_]

Bleh i got lost at when u go to the gunz part. i got lost at this part..


http://www.portforward.com/english/routers/port_forwarding/Comcast/CG814WG-comcast/GunZ.htm


i didnt know how to set up a external ip adress and i dunno how to get onto my routers website becuz i lost my manual! LIFE SUCKS! man...On gunz i get these spikes which i cant feel to like 400-10k ping...and it goes to like 60-110 in duels..im so confused....any suggestions?

That page has your routers default address, username and password on it. What do you mean external IP? Are you talking about a static IP.

Is there away to block everyones Port besides Can and USA?
Does not work that way. sorry.

[Heav3n]

Alot of ppl have lagg to me unless they are like in the same state or a neighbor stats of mine so its hard for me to get kills and its not my internet or computer would lagg be from my kind of router? it is a linksys,and i only get ae or NAT error in cw's but not normal dms or duels or quests or anything should is till do what ur guide says?

[_Aes_Sedai_]

Alot of ppl have lagg to me unless they are like in the same state or a neighbor stats of mine so its hard for me to get kills and its not my internet or computer would lagg be from my kind of router? it is a linksys,and i only get ae or NAT error in cw's but not normal dms or duels or quests or anything should is till do what ur guide says?

Distance does not have as much effect as people think it does. You lag to people who live elsewhere because they have a connection that is not very good or you do.

[Heav3n]

Distance does not have as much effect as people think it does. You lag to people who live elsewhere because they have a connection that is not very good or you do.

i have a pretty good connection not trying to be cocky or anything=\
but i noticed that there are ALOT of ppl that are less laggy in quest serv 2 then in quest 1 that cuz where the servers located? or becuz less foreigners play there -_-

[unbrokenlion]

Does this guide also help if you have always high ping :confused: and i'm only 14 and i use my dad pc mostly so do i need to change settings are something??

[_Aes_Sedai_]

Does this guide also help if you have always high ping :confused: and i'm only 14 and i use my dad pc mostly so do i need to change settings are something??

Yes this should help you, but don't e-scream at me please. XD

[Dougie666]

Heres a GOOD ONE! what if you dont have a router and your directly in the modem....Yah it wont let me connect...ive been away for few years and i come back to nat somthing and agent not found its really making me upset-_-

[Delirium_]

so is he saying that netgear wont work properly with gunz?

[_Aes_Sedai_]

Heres a GOOD ONE! what if you dont have a router and your directly in the modem....Yah it wont let me connect...ive been away for few years and i come back to nat somthing and agent not found its really making me upset-_-

XD, well you have nothing to forward I guess. I don't know what to tell you.

so is he saying that netgear wont work properly with gunz?

Yes, you may experience problems. They may have resolved many of the issues, but I can't say for sure. I know they took care of a couple of the linksys issues.

[Delirium_]

What is the user name and password for Comcast?
it says on portforward.com that the id is Comcast and the pw is 1234 but it doesnt work!
can anyone please tell me what the password and Id is?

[_Aes_Sedai_]

What is the user name and password for Comcast?
it says on portforward.com that the id is Comcast and the pw is 1234 but it doesnt work!
can anyone please tell me what the password and Id is?

If that does not work then someone changed your password. Ask whoever you might know in your house. If nobody knows, then hit the reset button. That should reset the password.

[Delirium_]

Ok i forwarded my port, and now i can see people move around. But the wierd thing is that they can't see me move. and when they shoot me i lose hp, when i shoot them nothing happens

[Stomach Pulser]

There is probably a lot of lag between you and your enemies.

[_Aes_Sedai_]

Ok i forwarded my port, and now i can see people move around. But the wierd thing is that they can't see me move. and when they shoot me i lose hp, when i shoot them nothing happens

That is still a form of agent error, but if you forwarded properly then I don't know what to tell you. Ask the help desk.

[Tanis-Zero]

Hmm. would this maybe fix the whole Play Live error thing?

[_Aes_Sedai_]

Hmm. would this maybe fix the whole Play Live error thing?

No, but there is a thread about that somewhere in here.

[sleekshot]

does this work if your wireless connection just sucks? pm answer to me please.

[_Aes_Sedai_]

does this work if your wireless connection just sucks? pm answer to me please.

I will answer her as well. If your connection is just lame to start with, not much will help you. People have told me that you can't forward wireless. That is a lie. It works just fine. I would try forwarding anyways just to see if that helps, but gunz runs better on a hardwire anyways.

[gangster01]

does it work through firefox

[gangster01]

can gunz be launched through firefox

[_Aes_Sedai_]

can gunz be launched through firefox

Tell me hwy you double posted XD.
At any rate, this is not the right thread to ask that question, but Gunz does work with firefox.

[Handr0z]

When i got a new better connection, I always get NAT in gunz ,and when i get NAT it makes my ping 200+. Even if the person lives 100 meters from me.I didnt have this problem with my older connection. I followed all the steps in portforward.com but i still get NAT error. This just sucks! Some1 can help?

[_Aes_Sedai_]

When i got a new better connection, I always get NAT in gunz ,and when i get NAT it makes my ping 200+. Even if the person lives 100 meters from me.I didnt have this problem with my older connection. I followed all the steps in portforward.com but i still get NAT error. This just sucks! Some1 can help?

Have you made sure that your window's firewall is off?

If it is, I would go back and make sure that you set your static ip correctly.

[Handr0z]

Firewall off when playing? Yes I have tryed it but still wont work. And i'm sure that my static ip is set correctly.

[Miskav]

Handr0z, Are you using a netgear/linksys router by any chance? Most of them are blocked by ijji randomly.
Don't ask why, you wont get an awsner, If you want to play for more then a week at a time, buy a new router >_>.

[Handr0z]

No, i'm using Buffalo.

[frogger]

They should have made the game/protection more compatable..........................

Why do they hate dynamic ips >_<

[_Aes_Sedai_]

They should have made the game/protection more compatable..........................

Why do they hate dynamic ips >_<

Dynamic ips aren't static. XD

Really though, if you have to find something every time you want to use it, wouldn't it get annoying, and wouldn't you lose it sometimes?

[solut10n2]

i have thomson speedtouch router, but do i need to connect port 7700-7800 to my gate-away or my computers ip?

[_Aes_Sedai_]

i have thomson speedtouch router, but do i need to connect port 7700-7800 to my gate-away or my computers ip?

Sould be your computer, but I could be misunderstanding you. If it does not work after doing it to your comp ip, then try the other.

[Still Waiting...]

Thanks, this really helped.

[cerv]

i have thomson speedtouch router, but do i need to connect port 7700-7800 to my gate-away or my computers ip?

Not the computers external ip O.O, I used 192.168.2.100 /101 /102, check which ones arent in use(might be a total diffirent ip). If you have done it check if you opened ports correctly, if you just go in game and check if you still got the error. it might not be the port forwarding problem.

Download a port forwarding tester just by googling it. If the ports 7700-7800 are still closed post here again ^.^

[_Aes_Sedai_]

Not the computers external ip O.O, I used 192.168.2.100 /101 /102, check which ones arent in use(might be a total diffirent ip). If you have done it check if you opened ports correctly, if you just go in game and check if you still got the error. it might not be the port forwarding problem.

Download a port forwarding tester just by googling it. If the ports 7700-7800 are still closed post here again ^.^

grrrrrrr. Infringing in my territory. Xd. Good advice, but I personally prefer using ips that are spread a little more (.110/.120/.130 and so on). I think it is easier to keep track of.

[Sheer]

Weird,i have netgear and it works just fine,and thanks for the help,there are alot of people on gunz who think they know everything.Guess your one of the few who do.

[Sheer]

Vpn ftw, & they just need to make the server run the maps (statics) so people can't edit their map in the folder & run around through walls (no clip), (easly done), I just think ijji are the worst developers in history, same with Maiet.

I could out do their dev skills anyday.

same here mate,and thats agreed with alot of people by this point

[Nightcide]

OK, I would really like some help with this. I am an AT&T internet user. I have a
Westell Versalink-327w. I have Port Forward 7700-7800 and I also have a static IP Address which is being used by me. I have tested it countless times and I am unable to "fix" the NAT problem. I have downloaded a Port Forwarding Tester and is says that my ports are still closed. Any advice would be major help. :confused:

--Edit--
Yes all of my firewalls are off.

[_Aes_Sedai_]

OK, I would really like some help with this. I am an AT&T internet user. I have a
Westell Versalink-327w. I have Port Forward 7700-7800 and I also have a static IP Address which is being used by me. I have tested it countless times and I am unable to "fix" the NAT problem. I have downloaded a Port Forwarding Tester and is says that my ports are still closed. Any advice would be major help. :confused:

--Edit--
Yes all of my firewalls are off.

what is your static ip set to?

[Nightcide]

what is your static ip set to?

192.168.1.136

[_Aes_Sedai_]

192.168.1.136

First of all, just change it something easier to lesson the probability of mistakes XD (I suggest 140 instead of 136).

Did you make sure that both tcp and udp are enabled? You should also enable DMZ.

[Nightcide]

First of all, just change it something easier to lesson the probability of mistakes XD (I suggest 140 instead of 136).

Did you make sure that both tcp and udp are enabled? You should also enable DMZ.

How would I go about enabling the TCP and UDP?

Running Windows XP if that may have anything to do with it.

[_Aes_Sedai_]

When you go into your router, go to the place where it lists the forwarded ports you have done. look at gunz. It should have an area called protocol, which should say something like tcp/udp. If it only says one of those, I am not sure how to change it without redoing the whole thing on your specific router. I was just looking it up. That has to be one of the worst router layouts I have ever seen. XD

[Nightcide]

When you go into your router, go to the place where it lists the forwarded ports you have done. look at gunz. It should have an area called protocol, which should say something like tcp/udp. If it only says one of those, I am not sure how to change it without redoing the whole thing on your specific router. I was just looking it up. That has to be one of the worst router layouts I have ever seen. XD


LOL, I will agree with you on that. Yes, I have done this for both TCP/UDP (you have to add two different ports 1 for udp and another for tcp, but they are both in the same port forwarding).

Also while looking around on my router, I have been at this for hours, I saw something that caught my eye. It reads "LAN DHCP Setting" and warnning lable of "The LAN DHCP server is currently enabled. Disabling the LAN DHCP server will require assigning static IP addresses to the computers."
Might this have anything to do with NATs also.

Sorry for so many questions :sad:


--edit--

Also should I try Port Triggering?

[_Aes_Sedai_]

XD please stop pming me. I had to go somewhere. Don't worry about all the questions. I don't mind.

What area of your router is that setting in? You may try triggering, but I don't see it making that much of a difference. I need to go look some things up before answering further. I won't be able to help you more to later this evening. Maybe someone else will be able to XD.

[Nightcide]

Sorry about the PMs =D. Like I said been at this all day.

On a further note. . I believe my problem lies in the DMZ. I do not know how to put my computer in this mode. Any help there would be nice.

[Nightcide]

OK, I have figured it out. In order for me to fix this I had to enable my DMZ mode on my router and enable IP Passthrough. I also had to take off my Static IP and Port forward for me to be able to run the game without any Nats at all! Porbably the wierdest thing I have ever seen. Hope this might help some of you who might have the same problem.

AKA I COULD NOT PORT FORWARD OR USE A STATIC IP TO FIX THIS ISSUE.

--Edit--
_Aes_Sedai_ - Thanks to the info provided by you I was able to conclude my problem. I am rewarding you with some reputation. Keep up the good work. ^_- sorry about the PMs xD

[_Aes_Sedai_]

Well I am glad I could help somehow Xd, and I am glad you figured t out. I have never heard of a router with that particular set up, but hey people make weird stuff.

[cerv]

OK, I have figured it out. In order for me to fix this I had to enable my DMZ mode on my router and enable IP Passthrough. I also had to take off my Static IP and Port forward for me to be able to run the game without any Nats at all! Porbably the wierdest thing I have ever seen. Hope this might help some of you who might have the same problem.

AKA I COULD NOT PORT FORWARD OR USE A STATIC IP TO FIX THIS ISSUE.

--Edit--
_Aes_Sedai_ - Thanks to the info provided by you I was able to conclude my problem. I am rewarding you with some reputation. Keep up the good work. ^_- sorry about the PMs xD

I actually did the same thing to fix my problem when i still had nat errors. I simply changed to dynamic ip. I also did a few other things to fix the problem though.

[lolled_out]

Well.. I have this NAT problem, but when im trying to portforward the web page dont have my router's model.. What I do now..?

[_Aes_Sedai_]

Well.. I have this NAT problem, but when im trying to portforward the web page dont have my router's model.. What I do now..?

I would check again, or run a search. If you want to take a bunch of screen shots, or post the model you have, it would be easier to help you.